| Basic parameters | |
| Measuring medium | Liquid or gas (compatible with contact materials) |
| Measuring range | -0.1～0～7MPa (see range selection table for details) |
| pressure type | Gauge pressure, absolute pressure, negative pressure |
| Medium temperature | -40～85℃ |
| connection time | 20ms |
| Stable performance | ±0.1% FS/year |
| temperature drift | ±0.01%FS/℃ (within temperature compensation range) ±0.05%FS/℃
(outside temperature compensation range) |
| Temperature compensation | -20～80℃ |
| Explosion-proof type | Intrinsically safe Ex ia ⅡC T6 Ga (4～20mA output only) |
| Protection level | IP65
Note: The above protection level refers to the level achieved after
the electrical connection is complete. |
| Accuracy level | 0.1%FS, 0.25%FS |
| response frequency | Analog signal output ≤30Hz Digital signal output ≤5Hz |
| overall weight | ≈381g |
| resolution | Analog output 0.01%FS, digital output 0.05%FS |
| Output power supply | |
| output | 4～20mA, RS485, 0～10VDC, 0～5VDC, 1～5VDC |
| powered by | 9～28VDC, 15～28VDC, 15～24VDC |
| Maximum power | |
| output | 4～20mA, RS485, 0～10VDC, 0～5VDC, 1～5VDC |
| power | ≤0.02Us(W), ≤0.015Us(W), ≤0.008Us( |
| Load characteristics | |
| voltage type | ≥10kΩ |
| Current type | Load≤{(Us-12)÷0.02}Ω (Us=supply voltage) |
| environmental conditions | |
| ambient temperature | -40～85℃ |
| environment humidity | 0%～95%RH (no condensation, no condensation) |
| Overpressure and explosion | |
| overload pressure | 0.2MPa, 0.27MPa, 0.33MPa, 0.53MPa, 0.67MPa, 1.2MPa, 1.67MPa,
2.67MPa, 4MPa, 7MPa, 0.27MPa, 0.33MPa, 0.53MPa, 0.67MPa, 1.2M |
| Burst pressure | 0.3MPa, 0.4MPa, 0.5MPa, 0.8MPa, 1MPa, 1.8MPa, 2.5MPa, 4MPa, 6MPa,
8MPa, 0.4MPa, 0.5MPa, 0.8MPa, 1MPa, 1.8MPa |
| overall material | |
| Diaphragm | Ceramics (contact with measured medium) |
| process connection | 304 stainless steel (contact with measured medium) |
| shell | 304 stainless steel |
| Core seal | See pressure and burst charts (contact with measured medium) |
| ED circle | Fluorine rubber |
| Hirschmann joint | ABS engineering plastics |
| mechanical stability | |
| Anti-vibration performance | 10g(20…2000Hz) complies with IEC60068-2-6 standard |
| Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
| electrical protection | |
| Short circuit protection | permanent |
| Reverse polarity protection | No damage, but doesn’t work |
| Insulation resistance | ≥100MΩ 500VDC |
| Dielectric strength | 500VAC |
| Output limits | |
| Output minimum | 4mA, 0, 0.001VDC |
| Output maximum | 20mA, 2000, 10VDC, 5VDC |
